Print Menu - Oki C5300n User Manual

PRINT MENU

This menu provides adjustment of various print job related functions.
PRINT MENU
Item
COPIES
DUPLEX
PAPER FEED
AUTO TRAY SWITCH ON
TRAY SEQUENCE
MP TRAY USAGE
MEDIA CHECK
RESOLUTION
TONER SAVE MODE OFF
MONO-PRINT SPEED AUTO
ORIENTATION
Settings Explanation
1-999 Enter the number of copies of a document to
be printed from 1 to 999.
ON/OFF Turns the duplex (2-sided) printing function
on or off if this feature is installed.
TRAY1 Selects the default tray for paper feed, Tray
TRAY2 1 (upper), Tray 2 (lower, if installed) or MP
MP TRAY Tray (multipurpose tray).
If two trays contain identical paper, the
OFF printer can switch to an alternative source
when the current tray runs out in the middle
of a print job.
DOWN Determines tray sequence order when
UP automatically switching.
PAPER FEED TRAY
DO NOT USE If a document to be printed demands a
WHEN MISMATCH paper size not installed in the selected tray,
the printer can automatically feed from the
multipurpose tray instead. If this function is
not enabled, the printer will stop and
request the correct size of paper to be
loaded.
ENABLE
Determines whether the printer check the
DISABLE size of paper loaded matches that required
for the document sent to print.
600x1200DPI Sets the default resolution for printing (dots
600DPI per inch). 600x1200DPI uses more memory
and requires more time to process, but
prints at a higher quality.
Reduces the amount of toner used for
ON imaging. Toner saving gives lighter prints
but is more economical.
Selects the printer's print engine speed for
COLOR SPEED the type of print media in use.
NORMAL SPEED
PORTRAIT Selects default page orientation between
LANDSCAPE portrait (tall) and landscape (wide).
MENU FUNCTIONS > 141