Network Menu - Oki C 3200n User Manual

Network Menu

Note: Factory default settings are shown in bold.
Item
TCP/IP
NETBEUI
IP ADDRESS
SET
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
INITIALIZE
NIC?
Settings
ENABLE
DISABLE
ENABLE
DISABLE
AUTO
MANUAL
xxx.xxx.xxx.xxx
Default =
198.168.100.100
xxx.xxx.xxx.xxx
Default =
255.255.255.000
xxx.xxx.xxx.xxx
Default =
192.168.100.254
[EXECUTE]
C3200n User's Guide
Menus • 73
Explanation
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Change this to Manual to specify the IP
address through the front panel (see
next entry). Required for non-DHCP
networks.
Current assigned IP address. To
change:
• Press ENTER.
+ –
• Use / keys to increment first
octet.
• Press ENTER to move on to the
next octet.
+ –
• Use / keys to increment
second octet.
• Press ENTER to move on to the
next octet.
+ –
• Use / keys to increment third
octet.
• Press ENTER to move on to the
last octet.
+ –
• Use / keys to increment 1st
octet.
• Press ENTER to register the new
address.
Current assigned subnet mask. To
change, proceed as above.
Current assigned gateway address. To
change, proceed as above.
Initializes the network card.