Paper Size Change Request; Printer Does Not Go Online; Printer Makes A Strange Noise; Printer Takes A Long Time To Start Printing - Oki C 3200n User Manual

Paper Size Change Request __________

Possible cause
Paper loaded in tray is
different size from
that formatted in
software application.

Printer does not go online ___________

Possible cause
Bad connection

Printer makes a strange noise ________

Possible cause
The printer is not
horizontal.
There are scraps of
paper or other foreign
matter inside the printer.
The top cover is not
firmly shut.

Printer takes a long time to start printing

Possible cause
The printer has to
warm up returning
from power save mode.
Remedy
Either change paper in tray to match size
formatted in application and press ON-LINE to
continue, or continue printing on existing paper
by pressing ON-LINE.
Remedy
Switch off the printer and disconnect the power
cable. Reconnect the power cable and switch
the printer on. If this does not clear the fault,
call for service.
Remedy
Place the printer on a stable, level surface.
Check the inside of the printer and remove
any such objects.
Press the left and right sides of the top cover.
Remedy
In the printer menu settings, set power save to
a higher value to increase the length of time
before entering power save mode (SYS CONFIG
MENU → POW SAVE TIME).
C3200n User's Guide
Troubleshooting • 115