Saeco PicoBaristo HD8927 Instruction Manual page 40

English
40
The AquaClean filter
cannot be activated as the
tick does not appear on the
display.
The filter cannot be
activated and the machine
asks for descaling.
The AquaClean filter is
installed, but the descaling
message appears.
The descaling message
appears before 8 filters
were replaced.
The type of milk used is not suitable
for frothing.
A filter has just been activated.
You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale the
machine.
The filter has not been replaced in
time after the AquaClean water filter
signal started flashing.
The filter has not been installed during
first installation but after having brewed
approx. 50 coffees (based on 100ml
cups). The machine has to be
completely limescale-free before
installing the AquaClean filter.
The AquaClean filter was not activated
in the menu at first installation.
After 8 filter replacements, you need
to descale the machine
You did not activate the AquaClean
filter correctly during first installation.
You placed the AquaClean filter after
having used the machine for a while.
You did not activate the replacement
filter in the machine menu.
You did not replace the filter when the
filter symbol started flashing.
Different types of milk result in
different amounts of froth and
different froth qualities. We have
tested the following milk types which
proved to deliver a good milk froth
result: semi-skimmed or full-fac
cow's milk, soy milk and lactose-free
milk. Other types of milk have not
been tested and may result in a
small amount of milk froth.
You have to dispense at least 10
cups (of 100ml each before you can
activate a new filter. Be careful as
you activate a new filter, the filter
counter will increase automatically.
Descale your machine first and install
the filter.
Descale your machine first and install
the filter.
First descale the machine and then
install a new AquaClean filter. After
descaling, the filter counter is reset
to 0/8. Always confirm filter
activation in the machine menu, also
after filter replacement
Descale your machine first and install
a new filter.
First descale the machine and then
install a new AquaClean filter. This
will reset the filter counter to 0/8.
Always confirm filter activation in the
machine menu, also after filter
replacement.
First descale the machine and then
install a new AquaClean filter.
Always activate the filter in the
machine menu.