Saeco PicoBaristo HD8927 Instruction Manual page 39

The coffee is not hot
enough.
The machine grinds the
coffee beans, but coffee
does not come out.
The coffee comes out
slowly.
The milk does not froth.
The coffee exit duct is dirty.
The coffee blend is not the correct
one.
The cups you use are cold.
The temperature is set too low. Check
the menu settings.
You added milk.
The grind is set too fine.
The brew group is dirty.
The coffee dispensing spout is dirty.
The coffee exit duct is blocked.
The grind is ground too finely.
The brew group is dirty.
The coffee exit duct is blocked.
The machine circuit is blocked by
limescale.
The milk carafe is dirty or not inserted
correctly.
The milk froth dispensing spout has
not been opened fully.
The milk carafe is incompletely
assembled.
English
Clean the coffee exit duct
thoroughly with the handle of the
multifunctional tool or a spoon
handle.
Try another coffee blend.
Preheat the cups by rinsing them
with hot water.
Set the temperature to high in the
menu.
Whether the milk you add is warm
or cold, it will always decrease the
temperature of the coffee to some
extent.
Adjust the grinder to a coarser
setting.
Clean the brew group.
Clean the coffee dispensing spout
and its holes with a pipe cleaner.
Clean the coffee exit duct with the
handle of the multifunctional tool or
a spoon handle.
Adjust the grinder to a coarser
setting.
Clean the brew group.
Clean the coffee exit duct with the
handle of the multifunctional tool or
a spoon handle.
Descale the machine.
Clean the carafe and make sure that
you position and insert it correctly.
Check that the milk froth dispensing
spout has been set in the correct
position.
Check that all the components have
been assembled correctly.
39