Saeco PicoBaristo HD8927 Instruction Manual page 10

English
10
PRIMING
HEATING UP
RINSING
ACTIVATE
AQUACLEAN FILTER?
2 MIN
INSERT FILTER
FILL WATER TANK
13The display shows the priming icon. The progress bar shows the progress of
the priming cycle.
14The machine heats up and the display shows the temperature icon.
15Empty the container and place it under the coffee dispensing spout.
16The machine starts rinsing water through the coffee dispensing spout. The
display shows the rinsing icon and a progress bar.
Note: Do not interrupt the rinsing cycle.
17The display asks: Activate AquaClean filter?
Note: If you want to install the AquaClean filter later, press the ESC button and
continue with the manual rinsing cycle. For installation at a later time, see
chapter 'AquaClean filter'.
18If you want to install the AquaClean filter, press the OK button. Activation
will take 2 minutes. The display reminds you: Insert filter, fill water tank.
19Remove the AquaClean filter from its packaging. Shake the filter for about 5
seconds.