Saeco PicoBaristo HD8927 Instruction Manual page 27

1
2
6 Press the PUSH button (1) and pull at the grip of the brew group to remove
it from the machine (2).
7 Clean the coffee exit duct thoroughly with a spoon handle or with the
multifunctional tool provided with the machine. Insert it as indicated in the
figure.
8 Remove the coffee residues container, empty it and rinse it under a
lukewarm tap. Let it dry and then reinsert it.
9 Rinse the brew group thoroughly with lukewarm water. Clean the upper
filter carefully.
Caution: Do not clean the brew group in the dishwasher and do not use
washing-up liquid or a cleaning agent to clean it. This may cause the brew
group to malfunction and may have a negative effect on the coffee taste.
10Let the brew group air-dry thoroughly.
Note: Do not dry the brew group with a cloth to prevent fibers from collecting
inside the brew group.
11Clean the inside of the machine with a soft damp cloth.
12Before you slide the brew group back into the machine, make sure the two
reference signs on the side match. If they do not match, perform the
following step:
English
27