Super Speed Draft; Printer Reset - Oki ML320Turbo User Manual

Super Speed Draft

To use Super Speed Draft (SSD), enter the Menu Mode and
make changes as follows:
1 Press SHIFT + SEL.
2 Press GROUP twice.
3 Press SET until DRAFT prints as the setting for the Print
Mode.
4 Press ITEM.
5 Press SET (SSD prints).
6 Press SHIFT + SEL to exit Menu Mode and save your
changes.
|
64 Microline 320/321 Turbo/n

Printer Reset

When you reset the printer, you reinitialize it.
You will need to reset the printer to clear some error
conditions
To reset the printer:
1 Press and release the SEL key to take the printer off-line.
The SEL light will be out.
2 Then, press and hold the SHIFT key and press the
RESET (CHARACTER PITCH) key.
3 The printer is reset.
!
Important!
A printer reset is NOT the same as a reset to factory
defaults.
A printer reset reinitializes the printer, but does NOT
affect any menu settings.
A reset to factory defaults returns ALL menu settings to
the factory defaults.