Oki 390 User Manual page 74

Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to "Using Your Printer, Menu Mode, Explanations of Menu Items."
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group Item
Set-Up Operator Panel Function
(continued) Reset Inhibit
Print Suppress Effective
Auto LF
Auto CR+
SI Select Pitch (10 cpi) *
SI Select Pitch (12 cpi) *
Time Out Print
Auto Select
Graphics Speed
Centering Position
* Appears only when the IBM emulation is selected.
|
74 Microline 390/391 Turbo
Settings (Defaults are set in bold italic)
Full Operation, Limited Operation
No, Yes
Yes, No
No, Yes
No, Yes
17.1 cpi, 15 cpi
20 cpi, 12 cpi
Valid, Invalid
No, Yes
Low, High
DEFAULT, MODE 1, MODE 2