Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to "Using Your Printer, Menu Mode, Explanations of Menu Items."
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in
bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group
Item
Rear Feed
Line Spacing
Form Tear-Off
Skip Over Perforation
Page Width (wide model only)
Page Length
Bottom Feed
Line Spacing
Form Tear-Off
Skip Over Perforation
Page Width (wide model only)
Page Length
|
72
Microline 390/391 Turbo
Settings (Defaults are set in bold italic)
6 LPI, 8 LPI
Off, 500 ms, 1 sec, 2 sec
No, Yes
13.6", 8"
11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"
6 LPI, 8 LPI
Off, 500 ms, 1 sec, 2 sec
No, Yes
13.6", 8"
11", 11-2/3", 12", 14", 17", 3", 3.5", 4", 5.5", 6", 7", 8", 8.5"