Programming; Customizing Features & Operations; Viewing Your Current Settings; User Function Settings - Oki B 4500 User Manual

PROGRAMMING

Customizing Features & Operations
Many features and functions of your fax machine have settings
which can be changed to customize the operations of your fax
machine. Because each country has different regulations, you
may not be able to access all of the settings listed below. If you
have trouble changing a setting, contact your dealer for
assistance.

Viewing Your Current Settings

Follow these instructions to obtain a configuration report showing
your fax machine's current settings.
1. Press the SELECT FUNCTION key.
2. Press the REPORT PRINT One Touch key. The display
show:
1:ACTIVITY REPORT
YES (ß ß ß ß ß ) NO (à à à à à /1-6)
3. Using the numeric keypad, press 5. The display shows:
5:CONFIGURATION
YES (ß ß ß ß ß ) NO (à à à à à /1-6)
4. Press the ô YES key and the report will begin printing.
5. Press the SELECT FUNCTION key to finish.
User's Guide

User Function Settings

User function settings allow you to customize the general
operation of your fax machine. Refer to the list below to
determine which settings you may need to change, then refer to
Changing User Function Settings to make the change.
Note: Depending on local telephone regulations, some of
the following user function settings may not be available.

User Function Settings List

01:MCF. (SINGLE-LOC.)- This function automatically
prints a Message Confirmation Report after each single location
transmission or polling transmission. Available settings are on
and off.
02:MCF. (MULTI-LOC.)- This function automatically prints
a Broadcast Confirmation Report after each multiple location
transmission. Available settings are on and off.
03:ERR. REPORT (MCF.) - This function automatically
prints a Message Confirmation Report each time an error occurs
during a transmission or polling transmission operation.
Available settings are on and off.
04:IMAGE IN MCF. - When a Message Confirmation Report
is automatically printed, this function adds a portion of the first
page your fax machine transmitted. This is printed at the bottom
of the message confirmation report. Available settings are on
and off.
61