Display Screen; Change Screen - Oki OKIFAX 5950 Features Setup Manual

Screens
The IPFax Console Software has two types of screens for
working with the network settings of a T.38 device.
· Display Screens
· Change Screens
The Display Screens allow you to view the settings. You
cannot change the settings from this screen.
The Change Screens allow you to change the network
settings.
Both the Display Screen and the Change Screen show the
same settings for
· Network
· Gatekeeper
· Address Table
To access the screens, run the IPFax Console Software,
connect to the T.38 device you want to work with, and click
on either Set Display or Set Change.
|
142 OKIFAX 5750/5950

Display Screen

Clicking on Cancel closes the screen.
Clicking on Save saves the setting values to a PC file and
then closes the screen.

Change Screen

Clicking on OK implements any changes you have made and
then closes the screen.
Clicking on Cancel closes the screen without saving any
changes you have made.
Clicking on Save saves the setting values to a PC file,
implements any changes you have made, and then closes the
screen.
Clicking on Read from a File allows you to display the
settings previously saved to a PC file.