Oki OKIFAX 5950 Features Setup Manual page 71

When you start OKIVIEW 32, you will see a list of the
Network Cards connected to the printers and facsimiles.
Check the MAC addresses of the printers and facsimiles to
identify the Network Card you want to configure.
!
The Network Card Report provides the MAC address as
explained earlier.
Next, select the Network Card you wish to configure.
Then go to MENU, then Setup, then Device Setup.
You can change the following settings.
General
TCP/IP
Enable DHCP/BOOTP or RARP
IP Address, Subnet mask and Default Gateway
Enable Banner for FTP/LPR
DNS settings
NetWare
EtherTalk
NetBEUI
SNMP
Internet Fax
Feature Set Guide: English
|
61