Sending To A Non-Programmed Alias; Receiving A T.38 Fax - Oki OKIFAX 5950 Features Setup Manual

Sending to a Non-Programmed Alias

Also known as Numeric Keypad (Walk-up) T.38 faxing
If you want to send a T.38 Internet fax, but you do not want
to program the alias for the IP Address as a One-Touch, you
must make sure that it is sent as an T.38 Internet transmission.
1 Load the document.
2 Press the # key.
!
The # symbol must be the first character entered for the
alias.
3 Input the alias.
!
You can enter the numbers 0 through 9 and the symbols
# and *.
Any other characters or symbols will be ignored.
4 Press Start.

Receiving a T.38 Fax

You do not need to perform any special procedures to receive
a T.38 Internet fax
Feature Set Guide: English
|
121