Oki OKIFAX 5950 Features Setup Manual page 130

Procedure
1 Load the document.
2 Select the method for entering the alias for destination
T.38 device.
For more information on entry methods, refer to the
User's Guide, "Basic Faxing, Sending a Fax."
Entry methods for T.38 transmissions are:
·
One-Touch
·
Non-programmed aliases
also known as a Numeric Keypad or walk-up
You must send the document as an Internet
Transmission.
See the following section ("Sending to a Non-
Programmed Alias") for more information.
|
120 OKIFAX 5750/5950
3 Press Start.
4 The machine scans the document and the display shows
that a transmission is being attempted.
#12345678
CALLING
5 When the connection has been made between the
sending and receiving machines, the display changes.
IPFAX JAPAN
Page 001
CALLING
!
The transmission rate does not display during T.38
transmissions.
6 At the end of the transmission, the result of the
communication session shows on the display and a
buzzer sounds.