Complete Set Of Cables; Parallel Signal Cables; Battery Cables; Guide Rail For Rack Installation - Liebert UHA1R-0100 User Manual

8.4 Complete Set Of Cables

8.4.1 Parallel Signal Cables

The parallel signal cable is compulsory in the parallel system, and its description is given in Table 8-5.
Refer to 3.4.2 Connecting Parallel Signal Cables for the connection of the parallel signal cables.
Model
UH62SA1SL3

8.4.2 Battery Cables

The battery cable is an option when the long back-up UPS is selected. When you select standard UPS, the battery
cable is the accessory in standard configuration, see Table 8-6 for its description. Refer to 2.5.2 Connecting Battery
Cables for the detailed operation.
Model
UHA2SA1SL4

8.5 Guide Rail For Rack Installation

The guide rail for rack installation is used in the rack installation of UPS, POD (optional) and battery module (optional).
See Table 8-7 for its description. Refer to 2.4.2 Rack Installation for the rack installation procedures.
Model
UF-RMKIT2438

8.6 Communication Options And Monitoring Options

The communication options and the monitoring options are listed in Table 8-8.
Name
SIC card
(can be connected to
the net port type of
temperature/humidity
sensor)
Table 8-5 Parallel signal cable description
Name
For N + 1 parallel system, N + 1 pieces of parallel
signal cables are required to be configured. For
example, 2 pcs of parallel signal cables for 1 + 1
Parallel signal cable
parallel system, 3 pcs of parallel signal cables for 2
+ 1 parallel system, 4 pcs of parallel signal cables
for 3 + 1 parallel system
Table 8-6 Battery cable description
Name
When standard UPS is selected, the battery cable is
configured in the UPS accessories, and there is no
need to select it again;
Battery cable
When the long back-up UPS is selected, and the UPS
is required to configure with a standard battery module
U16-07C1, the battery cable needs to be selected
Table 8-7 Guide rail for rack installation
Name
A set of guide rail includes a left guide rail and a right
guide rail,and its bearing is 50kg. The guide rail is
Guide rail for
used for the selected rack installation. It is applicable
rack installation
to various server cabinets, UPSs, modularized
batteries and PODs with standard dimension
Table 8-8 Communication options and monitoring options
Model
Conduct web remote monitoring for the UPS
through TCP/IP protocol and Internet;
UF-SNMP810 Support remote safety shutdown function;
Provide an extended net port, cascade at most 8
temperature/humidity sensors
Liebert
®
Description
Description
Description
Description
ITA 10kVA UPS User Manual
Chapter 8 Options
Appearance
Appearance
Appearance
Appearance
57