Advertisement
3. Pull the transceiver out of the SFP slot.
1 1
Set Up a Wireless Network
Wireless LAN is enabled by default. Use the settings on the Device bottom
panel to configure wireless devices that you want to connect.
Wireless Settings Example
SSID: ZyXEL0A561
WPA2-PSK: FB373BD35636BC45
The default wireless settings vary by SBG3600-N Series Device. Use the
information on the bottom panel of your Device.
The Web Configurator
Use the Web Configurator web browser tool to configure the Device. Your
computer and the Device need to be in the same IP address range to use it.
1. Open your browser and enter http://192.168.1.1 (the Device's default IP
address) as the address.
2
9
3
Advertisement
