Set Up A Wireless Network; The Web Configurator - ZyXEL Communications SBG3500-N series Quick Start Manual

Set Up a Wireless Network

You can set up a wireless network manually:
The wireless LAN on your SBG3500-N is enabled by default. To add a wireless
client to the network, use the settings found on the bottom panel of your
SBG3500-N, which will look similar to the following example:
SSID: ZyXEL0A561
WPA2-PSK: FB373BD35636BC45
Configure wireless devices that you want to connect to the wireless network to
use the same wireless settings as the SBG3500-N.
The default wireless settings vary for each SBG3500-N. Refer to the
bottom panel of your device and use the provided information.

The Web Configurator

The Web Configurator is a web browser tool that allows you to configure the
SBG3500-N. Your computer and the SBG3500-N need to be in the same IP
address range to use this tool.
1. Open your browser and enter http://192.168.1.1 (the SBG3500-N's default
IP address) as the address.
7