• The USB light turns on when your Device detects a connected USB
device.
• The HPNA light (VMG4380-B10A only) stays on if the HPNA port is
properly connected and blinks when there is traffic.
• The DSL1,2 lights are green when your Device has an ADSL connection.
They are orange when you have a VDSL connection. If you are not using
DSL bonding function, only DSL1 light will be on.
• The WLAN / WPS light flashes green when WLAN is activated and orange
while WPS is in process. It stays on green when the wireless LAN is ready
and blinks when there is traffic.
• The INTERNET light turns on when the gateway is able to access the
Internet and will blink when your Device is sending or receiving data.
If the lights do not come on, check your connections and inspect your cables for
damage. If the lights are still off, contact technical support.
Set Up a Wireless Network
You can set up a wireless network using the following methods:
Using Wireless Protected Setup (WPS)
Press the WPS button on the Device's front panel for more than 5 seconds to
turn the WPS function on.
6