Table of Contents
Advertisement
Section 3 - Configuration
Configure time and date settings here. Click Save Settings to apply your
changes.
Manually Set
Enter the complete time and date settings manually.
the Time and
Date:
Synchronize
Select or enter an NTP Server here. An NTP Server is a server on the
with NTP
Internet that maintains time. The NVR will contact the server you
Server:
entered and update to the correct time.
Time Zone:
Select your time zone from the pull-down list. There are three choices
for setting the time.
Enable
Check the box to enable daylight savings time (DST). You can enable
Daylight
automatic daylight savings time, or enter daylight saving time start
Saving:
and end dates manually. You can enter the month, week, day, hour and
minute when daylight savings time starts and ends, and also enter the
timezone offset from GMT/UTC.
D-Link DNR-2020-04P User Manual
Time and Date
45
Advertisement
Table of Contents
