Table of Contents
Advertisement
Section 4 - Applications
D-Link NVR Search Utility - Windows
In Windows, you can run the D-Link NVR Search Utility from the CD to search for the NVR on the local network. When powered
on, during the initial boot sequence, the device will wait to be assigned an IP address via DHCP by default. If it does not receive
a DHCP-assigned IP address, the Auto-IP process will assign a 169.254.xxx.xxx address to the device. If you want to change the
IP address before logging in, or are unable to connect to the NVR IP address, you can use the NVR Search Utility provided on
the product CD to locate the device on your network and make any changes that are needed.
Network
The D-Link NVR Search Utility displays any NVR devices it
Video
detects on the network.
Recorder:
Refresh:
Click to refresh the device list.
Configuration:
Click Configuration to access the Web-based configuration
of the NVR.
LAN:
Configure the LAN Settings for the NVR.
Receive
Select Enable to use DHCP for your LAN IP settings, or
DHCP:
Disable to use static IP.
Apply:
Click Apply to save and activate the changes to the
LAN Settings.
About:
Click About to view the software version of the NVR Search Utility.
Exit:
Click Exit to close the utility.
D-Link DNR-2020-04P User Manual
Applications
54
Advertisement
Table of Contents
