2.2 Customizing the Date and Time
The xStack Storage system maintains the current timezone, date and time. You may need to change
these settings the first time you configure the xStack Storage system, if time changes occur in your
area, or if you transport the xStack Storage system to another location. If you change these settings,
restart the xStack Storage system for the new settings to take effect.
To customize the date and time, perform the following procedure from any view.
1. On the Tools menu, click Customize Time Display.
The Customize Time Display dialog box appears (see Figure 2-9).
2. Select the appropriate time option. If you select Other, use the drop-down list to select
the appropriate time zone.
3. By default, time settings will be applied to all xStack Storage arrays being managed. To
apply the settings to just the current system, check the Only change setting for
checkbox.
4. Click OK.
5. Restart the xStack Storage system for the new settings to take effect.
18
Chapter 2 Getting Started
Figure 2-9. Customize Time Display Dialog Box
The system date and time is reflected in the Remote System Time advanced
setting of the System Administration View (see Table 5-2 on page 83).