16.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
NBG6815 Access and Login
•
Internet Access
•
Resetting the NBG6815 to Its Factory Defaults
•
Wireless Connections
•
USB Device Problems
16.2 Power, Hardware Connections, and LEDs
The NBG6815 does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the NBG6815.
1
Make sure the power adaptor or cord is connected to the NBG6815 and plugged in to an appropriate
2
power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the NBG6815.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Disconnect and re-connect the power adaptor to the NBG6815.
4
C
HAPTER
Troubleshooting
NBG6815 User's Guide
150
1 6
Section 1.7 on page
12.