Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 57 Expert Mode > Maintenance > Remote Management > Wake On LAN
LABEL
Wake On LAN over WAN Settings
Enable Wake On
LAN over WAN
Port
Wake On LAN
Wake MAC
Address
Start
Apply
Cancel
15.11 Log Screen
The Web Configurator allows you to look at all of the NBG6815's logs in one location.
You can configure which logs to display in the Log screen. Select the logs you wish to display. Click
Apply to save your settings. Click Cancel to start the screen afresh.
Use this screen to see the logged messages for the NBG6815. The log wraps around and deletes the
old entries after it fills. Select what logs you want to see from the Display drop list. The log choices
depend on your settings above this screen. Click Refresh to renew the log screen. Click Clear Log
to delete all the logs.
Chapter 15 Maintenance
DESCRIPTION
Select Enable to have the NBG6815 forward a WoL "Magic Packet" to all devices on the
LAN if the packet comes from the WAN or remote network and uses the port number
specified in the Port field. A LAN device whose hardware supports Wake on LAN then will
be powered on if it is turned off previously.
Type a port number from which a WoL packet is forwarded to the LAN.
This field displays the hostname and MAC address of the LAN device by default. Otherwise,
select User define to enter the MAC Address of the device on the network that will be
turned on.
A MAC address consists of six hexadecimal character pairs.
Click this to have the NBG6815 generate a WoL packet and forward it to turn the specified
device on.
A screen pops up displaying MAC address error if you input the MAC address incorrectly.
Click Apply to save your changes back to the NBG6815.
Click Cancel to begin configuring this screen afresh.
NBG6815 User's Guide
146
Advertisement
Table of Contents
