Wps Setting - Digisol DG-WA3002NP User Manual

DG-WA30002NP User Manual

2-5 WPS Setting

Wi-Fi Protected Setup (WPS) is the simplest way to build a connection
between wireless network clients and this Access Point. You need not select
encryption mode and input a long encryption passphrase every time you need
to setup a wireless client. You only have to press a button on wireless client
and this Access Point, and the WPS will do the setup for you.
This Access Point supports two types of WPS: Push-Button Configuration
(PBC), and PIN code. If you want to use PBC, you have to switch this Access
Point to WPS mode and push a specific button (hard/soft push button) on the
wireless client to start WPS mode. You can push Reset/WPS button of this
Access Point, or click 'Start PBC' button in the web configuration interface to
do this. Press WPS button on wireless client (hard/soft push button) within 2
minutes to establish a secured wireless connection.
If you want to use PIN code, you have to provide the PIN code of the wireless
client you wish to connect to this Access Point and then switch the wireless
client to WPS mode. The detailed instructions are listed below:
Note: WPS function of this Access Point will not work for those
wireless clients which do not support WPS.
55