Connecting To Wireless Access Point Using Web Browser - Digisol DG-WA3002NP User Manual

2-2 Connecting to wireless Access Point using web browser

After the network connection is setup, next step is to setup the Access Point
with proper network parameters, so it can work properly in your network
environment.
Please use the web browser to configure the Access Point. A computer with
wired Ethernet connection to the Access Point is required for this first-time
configuration.
Before you start to configure the Access Point, please configure the IP
address of the computer in the same network class as that of the Access Point.
If the operating system of your computer is....
Windows 95/98
Windows 2000
Windows XP
Windows Vista
- please go to section 2-2-1
- please go to section 2-2-2
- please go to section 2-2-3
- please go to section 2-2-4
25
DG-WA30002NP User Manual