Ap Bridge-Point To Multi-Point Mode - Digisol DG-WA3002NP User Manual

2-4-4 AP Bridge-Point to Multi-Point Mode

In this mode, this wireless Access Point will connect up to four wireless
Access Points which use the same mode, and all wired Ethernet clients of
every wireless Access Point will be connected together. You can use this
mode to connect a network to other networks which are physically isolated.
Please note that when you set your Access Point to this mode, it will not
accept regular wireless clients anymore.
When you select 'AP Bridge-Point to Multi-Point', the following options will
be displayed:
Here is the description of every setup item:
Parameter
Band Please select the wireless band you wish to use. By selecting
different band settings, you'll be able to allow or deny the
wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11n, or 802.11g) will be able to connect to this Access
Point.
DG-WA30002NP User Manual
Description
47