Ap Mode - Digisol DG-WA3002NP User Manual

2-4-1 AP Mode

This is the most common mode. When in AP mode, this Access Point acts as
a bridge between 802.11b/g/n wireless devices and wired Ethernet network,
and exchange data between them. When you select 'AP', the following
options will be displayed:
Here is the description of every setup item:
Parameter
Band
Main ESSID
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to allow or
deny the wireless
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G),
only wireless clients using the wireless band you select
(802.11b, 802.11n, or 802.11g) will be able to connect to
this Access Point.
If you select 2.4GHz (B+G), then only wireless clients
using 802.11b and 802.11g band will be able to connect
to this Access Point.
If you want to allow 802.11b, 802.11g, and 802.11n
clients to connect to this Access Point, select 2.4GHz
(B+G+N).
Please input the ESSID (the name used to identify this
wireless Access Point) here. You can input up to 32
40
DG-WA30002NP User Manual
Description
client of a certain band.