Ap Bridge-Wds Mode - Digisol DG-WA3002NP User Manual

2-4-5 AP Bridge-WDS Mode

In this mode, this wireless Access Point will connect to up to four wireless
Access Points which use the same mode, and all wired Ethernet clients of
every wireless Access Point will be connected together. You can use this
mode to connect a network to other networks which are physically isolated.
When you use this mode, this Access Point is still able to accept wireless
clients. When you select 'AP Bridge-WDS', the following options will be
displayed:
Here is the description of every setup item:
Parameter
Band Please select the wireless band you wish to use. By selecting
different band settings, you'll be able to allow or deny the
wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only
wireless clients using the wireless band you select (802.11b,
802.11n or 802.11g) will be able to connect to this Access
Point.
If you select 2.4GHz (B+G), then only wireless clients using
DG-WA30002NP User Manual
Description
49