Table of Contents
Advertisement
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B within three seconds after the "Press Ctrl+B to enter extended boot
2.
menu..." prompt message appears.
BootWare password: Not required. Please press Enter to continue.
Press Enter and read the password recovery capability state message displayed
3.
before the EXTEND-BOOTWARE menu.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
Dealing with console login password loss
when password recovery capability is
enabled
Reboot the router to access the EXTEND-BOOTWARE menu, and then enter 6.
4.
The current mode is password recovery.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default Configuration
|<6> Skip Current System Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
39
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Advertisement
Table of Contents
