Resolved Problems In Cmw520-R2105P06; Resolved Problems In Cmw520-R2105P02 - HP A-MSR20 Release Notes

Hide thumbs Also See for A-MSR20:
Table of Contents

Advertisement

Resolved Problems in CMW520-R2105P06

RTD51595
Symptom: The packets can't be forwarded m.
Condition: When configuration the interface of virtual-template as the
output-interface of static route.
RTD52249
Symptom: The key of HWTACACS can't more than 96 characters.
Condition: None
RTD52822
Symptom: The packets matched up the static route can't be transmitted by the
Virtual-template interface, and the static route to Virtual-template was invalid.
Condition: The Virtual-template interface of the router connected a point-to-point
network, and the Virtual-template interface was an output interface of a static route.
RTD52279
Symptom: The POS connections to the AUX interface failed.
Condition: Run the POS APP function at the AUX interface of the router.
RTD52833
Symptom: The caller name couldn't be displayed at the called.
Condition: The VOIP function was enabled at the router, and the ISDN SETUP message
from the PBX didn't contain the caller name, instead the caller name was included at
the following Facility message.

Resolved Problems in CMW520-R2105P02

RTD51702
Symptom: Then the router can't recognize the USB 3G Modem.
Condition: Plug the USB 3G Modem in and reboot the router with empty configuration.
RTD51603
Symptom: The router will be crash when send packets of ICMP unreachable.
Condition: When configuration the command of "nat outbound" on the interface.
RTD51986
Symptom: The A-MSR 30-16 didn't support the DMC function, and there is any
command of DMC at the A-MSR 30-16.
Condition: None
40

Advertisement

Table of Contents
loading

This manual is also suitable for:

A-msr30A-msr50A-msr900Msr93x series

Table of Contents