Paper Sensor - Toshiba MR-2018 Service Manual

(2) Parts removal
1) Remove one screw.
2) Remove the earth wire.
3) Remove the E-ring.
4) Remove the bearing.
5) Open the scan plate.
4
5
■ Note for reassembly
Pass the earth wire through the hole to the outside of the frame,
then install parts.
(3) Scan plate removal
1) Remove the scan plate.
1
(4) PS roller removal
1) Remove the PS roller.
2
1
4
3
1
MR-2019/2018/MY-1034 DISASSEMBLY AND ASSEMBLY 5 - 5
K. Upper transport roller
(1) Parts removal
1) Remove the gear.
2) Remove the upper transport release arm.
3) Remove the bearing.
4) Remove the E-ring.
5) Remove the bearing.
2 3
1
■ Note for reassembly
Use care so that the rib on the upper transport release arm catches
the guide.
(2) Upper transport roller removal
1) Remove the upper transport roller.
1
L. Paper sensor
1) Disconnect one connector.
2) Remove the paper sensor.
2
1
5 4