Rebuild Array - Nvidia NFORCE 650I Ultra User Manual

Rebuild Array

The Rebuild Array option allows you to rebuild a disk in the array
while the system is running without disrupting user or application
access to the data set.
Note:
Rebuilding an array can take up to a full day to complete. This operation
occurs in the background and does not impede any work being done. If you
need to shutdown, the rebuild operation continues upon restart.
Use the following procedure to rebuild an array:
1. Identify the affect disk in the array and replace it.
2. Click on
Rebuild Array
Rebuild Array Wizard.
3. Click to continue
Next
with the wizard and display
the RAID Array Selection
menu.
4. Select the array with that
had the affected disk and
click .
Next
Rebuilding a degrading
array adds a new disk to
that array. Data from the
under Management to launch the NVIDIA
Using NVIDIA Software
97