Synchronization Instructions - Nvidia Quadro FX 4500 Software Manual

Synchronization Instructions

Basic Setup Summary
The following are the basic steps to synchronize the SDI output.
1 Connect the external sync source to the appropriate BNC connector on the graphics
card.
See
external sync signal to the graphics card.
2 Configure the sync source.
a Open the Graphics to Video Out page and click Enable SDI Output.
Figure 4.4
a Click the Sync Mode list arrow and then click either Genlock or Framelock
b If you chose frame lock synchronization, click the Output Video Format list arrow
NVIDIA Corporation
Quadro FX 4500/5500 SDI User's Guide – Version 2.0
"Understanding the Connections" on page 10
Graphics to Video Out Page
synchronizing modes.
and then click the signal format you want to use.
Only those modes that are compatible with the detected sync signal will appear in
the SDI signal format list.
Linux—Using the Graphics to Video Out Control Panel
for instructions on connecting the
C 4
HAPTER
39