Nvidia Quadro FX 4500 Software Manual page 21

Forceware graphics drivers
Hide thumbs Also See for Quadro FX 4500:
Table of Contents

Advertisement

Step 2: Choose a Synchronization Method
Click the Sync Option arrow and then click the method you want to use to synchronize
the SDI output:
• Internal: The SDI output will be synchronized with the timing chosen from the SDI
signal format list.
• Genlock: The SDI output will be synchronized with the external sync signal.
• Frame Lock: The SDI output will be synchronized with the timing chosen from the SDI
signal format list.
This list is limited to timings that can be synchronized with the detected external sync
signal.
For more information regarding genlock and frame lock, see the section
the SDI Output to an External Source" on page
Step 3: Specify the SDI Signal Format
The SDI signal format controls the video resolution, field rate, and SMPTE signalling
standard for the outgoing video stream.
Click the SDI signal format arrow and then click the signal format you want to use.
Note: Your options for this setting depend on which Sync option you chose in the
Step 4: Specify the SDI Output Format
The SDI output format controls the color model, data packing, and alpha or z components
in the outgoing video stream.
Click the SDI output format arrow and then click the color format you want to use.
Step 5: Apply and Verify the Changes
Click OK or Apply to put the new settings into effect.
NVIDIA Corporation
Quadro FX 4500/5500 SDI User's Guide – Version 2.0
previous step.
genlock synchronization
If you chose
The list box will be grayed out, preventing you from choosing another format.
frame lock synchronization
If you chose
the detected sync signal will appear in the SDI signal format list.
Windows–Using the Graphics to SDI Control Panel
22.
, the sync source controls the SDI signal format.
, only those modes that are compatible with
C
3
HAPTER
"Synchronizing
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents