Synchronization Instructions - Nvidia Quadro FX 4500 Software Manual

Synchronization Instructions

Basic Setup Summary
The following are the basic steps to synchronize the SDI output.
1 Connect the external sync source to the appropriate BNC connector on the graphics
card.
See
external sync signal to the graphics card.
2 Configure the sync source.
Use the NVIDIA Graphics to SDI property page to configure the SDI output
synchronization.
Figure 3.4
a Click the Sync Options list arrow and then click either External genlock or External
b If you chose external frame lock synchronization, click the SDI signal format arrow
c Click Apply.
NVIDIA Corporation
Quadro FX 4500/5500 SDI User's Guide – Version 2.0
"Understanding the Connections" on page 10
Graphics to SDI Page—Configuring an External Sync Source
framelock synchronizing modes.
and then click the signal format you want to use.
Only those modes that are compatible with the detected sync signal will appear in
the SDI signal format list.
Windows–Using the Graphics to SDI Control Panel
for instructions on connecting the
C 3
HAPTER
23