Changing Sdi Settings Under Dualview - Nvidia Quadro FX 4500 Software Manual

Changing SDI Settings Under Dualview

To change the SDI settings once Dualview is enabled,
1 Open the Microsoft Display Properties Settings page as described in steps 1 and 2
above
2 Right-click Display #2, then from the pop-up menu click Properties.
3 Click the Quadro FX 4500 SDI or Quadro FX 5500 SDI tab and then click the Graphics
to SDI tree item from the side menu.
You can now change the SDI settings for the 2nd display, or SDI output. Because
Dualview is enabled, the Enable/Disable controls are not available and the panel says
ʺSend SDI output to: NVIDIA SDIʺ.
Figure 3.9
NVIDIA Corporation
Quadro FX 4500/5500 SDI User's Guide – Version 2.0
Graphics to SDI Page with Dualview Enabled
Windows–Using the Graphics to SDI Control Panel
C 3
HAPTER
29