Install Nvidia Sli Software - Nvidia nForce 680I LT SLI Hardware User Manual

3. Install the NVIDIA SLI connector across the two outer graphics cards as shown below.
Each SLI-Ready graphics card has an SLI finger on the upper side of the card.

Install NVIDIA SLI Software

Upon power up, the operating system recognizes the new NVIDIA SLI-Ready components
and displays the Found New Hardware message.
Your motherboard shipped with a set of drivers that you must install. Once these drivers are
installed, reboot your system.
As part of the NVIDIA Unified Driver Architecture, NVIDIA drivers include a full set of controls
for SLI systems.
Mainboard nForce 680i SLI/
Mainboard nForce 680i LT SLI
Install the SLI connector
onto the two outer cards.
74