Front Panel Headers: Frontpnl - Nvidia nForce 680I LT SLI Hardware User Manual

Front Panel Headers: FRONTPNL

Pin Assignment
1 HD_PWR (+)
3 HAD#
5 GND
7 FP_RESET#
9 N/C
Hard Disk LED Header (Orange): HD_LED
If your case front panel has a hard drive LED cable, attach it to this header. The LED will
flicker when there is hard disk drive activity.
Reset Switch Header (Blue): RESET
This header can be attached to a momentary SPST switch (reset button) cable on your case
front panel. The switch is normally left open. When the switch closed, it will cause the
mainboard to reset and run the POST (Power-On Self Test).
Power LED Header (Green): PWRLED
These mainboards provide a 2-pin power LED header. If there is a 2-pin power LED cord on
your case front panel, you can attach it to the 2-pin power LED header. Then the power LED
will illuminate while the system is powered on.
Power Switch Header (Red): PWRSW
This header can be attached to a power switch cable on your case front panel. You can turn
your system on or off by pressing the button attached to this power switch cable.
Mainboard nForce 680i LT SLI
Function Pin
2
Hard Disk LED
(HD_LED)
4
6
Reset Switch
(RESET)
8
10
14
Mainboard nForce 680i SLI/
FRONTPNL
Assignment
HDR_BLNK_GRN
Front Panel Light
(PWRLED)
HDR_BLNK_YEL
SWITCH_ON#
Power Switch
(PWRSW)
GND
Key
Function