LM Main Menu
Single-Character Quick Commands
At the bottom of the LM menu Quick Commands box are
two commands:
4-4 Laptop Manager
F1 — Help screens
F2 — (Laptop) File Manager
F3 — Save Config(uration) described under the
utility elsewhere in this manual
SETCMOS
F4 — Reset Config(uration), which is part of the
utility
SETCMOS
Pressing D (for
DOS
prompt at the bottom of the screen where you can enter
commands of up to 67 characters. Pressing
MS-DOS
ENTER starts the command. When the command is
executed, pressing any key returns you to the LM main
menu.
Pressing P (for path) causes LM to display a prompt at
the bottom of the screen where you can change drives
or directories. For example, you can change from the
(root directory) to the
C:\
pressing P, typing C:\UTILS, and pressing ENTER.
You can change from the
pressing P and A, and then pressing ENTER.
command) causes LM to display a
directory by
C:\UTILS
drive to the
C:\
drive by
A:\