SPEED Utility
The
operating speed to low, medium, or high. However, because
the faster speeds consume more power, you may want to
select the low or medium speed to conserve power when
you are operating the computer on its internal battery.
You can change
in this manual) or by pressing CTRL-ALT- or CTRL-ALT-
(except on
Show Speed Switch
The
CPU
SPEED /S
and press ENTER. The program displays
Current CPU speed is set to [High, Medium, or Low]
Note: For this utility to work correctly on a DX4 model,
EMM386 or other memory managers must not be loaded.
Using the SPEED Utility
You can set the
typing at the
SPEED [/L] [/M] [/H]
and pressing ENTER. The /L switch sets
/M to medium, and /H to high. The program responds to
the command by displaying
Current CPU speed is set to [Low, Medium, or High]
5-12 Power-Saving Utilities
utility enables you to set the current
SPEED
CPU
models).
DX4
command /S(how) switch displays the current
SPEED
speed setting if you type at the
speed to low, medium, or high by
CPU
prompt
C:\>
speed in Setup (as described elsewhere
C:\>
CPU
prompt
speed to low,
CPU
SPEED Utilit y