Bosch IXO Original Instructions Manual page 28

OBJ_DOKU-28030-004.fm Page 28 Wednesday, August 6, 2014 10:12 AM
28 | English
 Before each use, check the battery charger, cable and plug. If damage
is detected, do not use the battery charger. Never open the battery
charger yourself. Have repairs performed only by a qualified techni-
cian and only using original spare parts. Damaged battery chargers,
cables and plugs increase the risk of an electric shock.
 Do not operate the battery charger on easily inflammable surfaces
(e. g., paper, textiles, etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire hazard.
Products sold in GB only: Your product is fitted with a BS 1363/A approved
electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service agent.
The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and
should never be inserted into a mains socket elsewhere.
Product Description and Specifications
Intended Use
The machine is intended for driving in and loosening screws.
The light of this power tool is intended to illuminate the power tool's direct ar-
ea of working operation and is not suitable for household room illumination.
Product Features
The numbering of the product features refers to the illustration of the
machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Rubber cap
4 Indicator for right rotation
1 609 92A 0P3 | (6.8.14)
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools