Set Up Your Liberty Identity Server; Manage Your Federations - Novell eBook Reader Administration Manual

4. Set Up Your Liberty Identity Server

Continuing where you left off in
list of your identity servers.
To add a new Liberty identity server:
You can select and delete servers as needed.

5. Manage Your Federations

If you have federated users, you can manage your federations by doing the following:
4
Enter the Descriptive Name and URL for the service provider's definition you want to import.
For example, if your IP address is 1.1.1.1, you would specify the URL as http://1.1.1.1/nwc/
metadata.
5
Click OK.
1
Click New Liberty Identity Server.
2
At the Modify Object page, enter the Descriptive Name and IP Address of the identity server.
The IP Address should be the server that is going to run the IDP.
Figure 21 Modify Object Page
3
Click OK.
You are returned to the servers list, where your new server should now be listed.
1
In iManager, click the Liberty Management role, then select the Manage Federations task.
2
Select the Site and enter the user context.
To browse for the User Context, select the icon to the right of the field.
Step 5, click the Liberty Identity Servers tab. This page shows a
Creating a Liberty IDP Site
27