Administration Console; Linux Administration Console; Windows Administration Console; Identity Server - Novell ACCESS MANAGER 3.1 SP1 - QUICK STARTS 11-20-2009 Quick Start Manual

1.2 Administration Console

What you need to know
For more information

1.2.1 Linux Administration Console

1 Use
install.sh
2 At the Installation menu, select 1, then follow the prompts.
3 Answer yes to the primary installation prompt.

1.2.2 Windows Administration Console

1 Download the Windows file and execute it.
For software download instructions, see the
www.novell.com/documentation/novellaccessmanager31/readme/
accessmanager_readme.html).
2 Select to install the Novell Access Manager Administration component.
3 Answer yes to the primary installation prompt.

1.3 Identity Server

What you need to know
For more information

1.3.1 Linux Identity Server

1 Use
install.sh
2 At the Installation menu, select 2, then follow the prompts.

1.3.2 Windows Identity Server

1 Download the Windows file and execute it.
10 Novell Access Manager 3.1 SP1 Quick Starts
The username and password you want to use for the Access
Manager administrator.
This is your first installation of an Administration Console, so when
prompted, answer Yes for a primary installation.
You can create a failover environment by installing more than one
Administration Console. For more information, see
Fault Tolerance" in the
See "Installing the Access Manager Administration
Access Manager 3.1 SP1 Installation
to start the installation.
Username and password of the Access Manager administrator.
(Conditional) IP address of the Administration Console if it is installed
on a separate machine
See "Installing the Novell Identity
SP1 Installation Guide.
to start the installation.
Novell Access Manager 3.1 SP1 Setup
Guide.
"Novell Access Manager Readme" (http://
Server" in the Novell Access Manager 3.1
"Clustering and
Guide.
Console" in the Novell