Adding Additional Users; Customizing Your Liberty Sp User Interface - Novell eBook Reader Administration Manual

Adding Additional Users

As part of your installation, one user is created. Adding additional users to your configuration is
optional. If you want to add more users, before federating your first user, locate the Liberty
Principal tag section of your XML file (including the opening and closing portions of the tag), then
copy and paste that section to create the additional users.
You should note that as the system runs and identities are created, new tags are placed inside the
Liberty Principal section of your XML file. You should only copy the following portions of the tag:
<LibertyPrincipal>
</LibertyPrincipal>

Customizing Your Liberty SP User Interface

If you use the sample service provider code to create your own SP, you will want to change the
World Financial look of the SP to your own company logo, etc., before putting your SP into
production mode. You do this by modifying the .jsp files that are located in a subdirectory of the
application directory you set up during the SP installation. For example, if you accepted the
installation default directory, the .jsp files would be located at C:\Program
Files\Novell\Tomcat\webapps\nwt\jsp.
The following table is a list of the .jsp files that are available for the SP:
Table 2 JSP Files for the IDP
File Name
login.jsp
main.jsp
err.jsp
postit.jsp
fedtermok.jsp
manage.jsp
logframe.jsp
logheader.jsp
For a list of the .jsp files for the identity provider, see
Interface" on page
38
Liberty Identity Provider for Novell eDirectory
<dn><value>spuser</value></dn>
<password><value>spuser</value></password>
<fullname><value>Jonathan</value></fullname>
30.
Definition
Prompts the user to log in.
Displays the main page.
Reports an error.
Sends an automatic POST to another provider. This feature
is invisible to the user.
Reports that federation termination was successful.
Shows the list of identity providers. Allows the user to
federate and defederate.
Shows the log. For debugging only.
Shows the log. For debugging only.
"Customizing Your Liberty IDP User