Novell eBook Reader Administration Manual page 45

<Directory "C:/PROGRA~1/Novell/Tomcat/webapps/eMFrame/META-INF/">
AllowOverride None
deny from all
</Directory>
JkMount /eMFrame/webacc
JkMount /eMFrame/webacc/*
JkMount /eMFrame/*.jsp
8
In this same Apache ssl.conf file, add a line for a second SSL listening port for the common
domain. (You could add a second IP address instead of a second port. See the
site (http://httpd.apache.org/docs-2.0/vhosts/ip-based.html)for details.
Change the following:
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
Listen 443
to the following:
#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
Listen 443
Listen 444
9
In the same Apache ssl.conf file, modify the following lines that are bolded as shown in the
first virtual host section:
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate.
# the certificate is encrypted, then you will be prompted for a
# pass phrase.
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile conf/ssl/myssl.crt
#SSLCertificateFile conf/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file.
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile conf/ssl/myssl.key
#SSLCertificateKeyFile conf/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
SSLCertificateChainFile conf/ssl/trustedroot.crt
#SSLCertificateChainFile conf/ssl.crt/ca.crt
10
If you are using self-signed certificates, the last bolded line above is not needed.
ajp13
ajp13
ajp13
Note that a kill -HUP will prompt again.
Keep in mind that if
Modifying Apache
Apache Web
If
Keep
41