Advertisement
Ilmalämpöpumppujen myynti, huolto ja asennus: Jäähdytinpalvelu RefGroup Oy.
9-5-2. Name and Functions of Indications on Remote Controller
[Display]
All indicators, except for the clock time indicator, are displayed by pressing the
a Transmission mark
This transmission mark ( ) indicates when the remote controller transmits signals to the indoor unit.
b Mode indicator
Indicates the current operation mode.
(AUTO: Automatic control, A: Auto changeover control,
: HEAT)
c Temperature indicator
Indicates the temperature setting (17˚C to 30˚C).
d PURE indicator
Shows that the electrical air purifying operation is in progress.
e FAN speed indicator
Indicates the selected fan speed. AUTO or one of five fan speed levels (LOW
LOW+
, MED
Indicates AUTO when the operating mode is either AUTO or
f TIMER and clock time indicator
The time setting for timer operation or the clock time is indicated.
The current time is always indicated except during TIMER operation.
g Hi POWER indicator
Indicates when Hi POWER operation starts.
Press the Hi POWER button to start and press it again to stop operation.
h
(MEMORY) indicator
Flashes for 3 seconds when the MEMO button is pressed during operation.
The
mark is shown when holding down the button for more than 3 seconds
while the mark is flashing.
Press another button to turn off the mark.
i ECO indicator
Indicates when the ECO is activated.
Press the ECO button to start and press it again to stop operation.
j A, B change indicator remote control
• When the remote control switching function is set, "B" appears in the remote
controller display. (When the remote control setting is"A", there is no indication at this position.)
Lue lisää nettisivuiltamme: www.ilmalämpöpumput.com
, MED+
, HIGH
button.
c
: COOL,
: DRY,
,
) can be shown.
i
: DRY.
• In the illustration, all indicators are shown
for purposes of explanation. During
operation, only the relevant indicators are
shown on the remote controller.
– 46 –
b h j
a
d
e
g
f
Hide quick links:
Advertisement
Chapters
