Checking Photos Taken (Rec Check); P2 Card Access Lamps; Protecting Against A Possible Erasure - Panasonic AG-HVX202AEN Operating Instructions Manual

Checking photos taken (REC CHECK)

In the shooting pause mode, press the REC
CHECK button.
A few seconds of the last thing you shot play.
•• Note that this REC CHECK portion will also be
recorded to any equipment you have set up to
make backup recordings.
•• Only the POWER and START/STOP buttons are
operable during REC CHECK.
•• The REC CHECK function does not work when
PC, MCR or DUB has been selected as the
operation mode.
The HD recording(1080i/50i) settings are already
made in the default mode.
(To view the current settings, see page 43.)

P2 card access lamps

CAMERA mode (MCR)
Lights green: Data can be saved onto the cards or
loaded from them.
Blinks green (slow): No available space on card,
card is write-protected
Lights orange: Slot that is the object of recording
Blinks orange: Data is now being accessed.
Blinks orange (fast): A card is now being
recognized.
Both lamps blink orange: Ejection of card during
access
Off: Cards have not been inserted or formatted.
Insertion of incompatible card.
PC mode (USB DEVICE)
Blinks orange: Data is now being accessed.
Off: A status other than access underway.
PC mode (1394 DEVICE)
Blinks orange: Connected
Off: Not connected
PC mode (1394 HOST)
Lights green: Access standby.
Blinks orange: Data is now being accessed.
Off: Cards have not been inserted or formatted.
Insertion of incompatible card.
P2 card access lamp

Protecting against a possible erasure

Switch the write-protect switch of the P2 card to
[PROTECT].
Write-protect switch
PROTECT
P2
25