Table of Contents
Advertisement
Checking photos taken (REC CHECK)
Press the REC CHECK/PHOTO button while in
recording standby mode. The last two seconds of
video and audio will be played, and the camera
returns to recording standby mode.
•
Only the POWER and START/STOP buttons are
operable during REC CHECK.
•
The REC CHECK images are also recorded
when a device is connected to the camera and
backup images have been recorded.
•
The REC CHECK function does not work when
PB has been selected as the operation mode or
when connected to a computer.
•
This function also does not work if the REC
FORMAT has been changed or if the camera has
been set to CAMERA mode after having switched
to PB mode after recording.
•
The REC CHECK function does not work after
interval recording.
•
This function does not work if the SD Memory
Card is removed and reinserted.
Formatting SD Memory Cards
1
Set the camera's power switch to ON.
(Page 26)
2
Press the MENU button.
3
Touch YES for CARD FORMAT in the setting
menu OTHER FUNCTIONS screen.
•
Press the MENU button or touch EXIT to
close the menu display.
4
Touch YES on the confirmation screen.
•
The SD Memory Card will be formatted.
5
Touch EXIT.
•
When an SD Memory Card is formatted, all
data recorded on the card will be erased and
will not be restorable.
Save all important data to your computer.
35
Advertisement
Table of Contents
