Thumbnail Screen; Basic Thumbnail Screen Operations - Panasonic AG-HVX202AEN Operating Instructions Manual

Thumbnail screen

Video data created on the P2 card in one shooting session is called a clip. When the MCR mode has been
established by the MEDIA switch set to the P2 status, the clips will be displayed on the LCD screen as
thumbnails. (When there is a large number of clips, it will take some time for them to be displayed on the
screen.)
You can perform the following operations using the thumbnail screen.
•• Play, repair and delete clips as well as add and delete shot marks.
•• Format P2 cards and SD memory cards.
•• Load the metadata (shooting information, etc.) from SD memory cards to the unit.

Basic thumbnail screen operations

To use the thumbnail menu:
1
On the thumbnail screen, press the MENU button to display the menu.
2
Select the item using the
button.
If another menu appears, repeat this step.
•• To return to the previous screen, select EXIT and press
button.
•• To release the menu mode, press MENU.
To select thumbnails: Select the thumbnails (the yellow frame moves) using the
and press the
deselect the clip. To scroll the pages, press the PAGE (- or +) button.
To play back clips: Select the thumbnail, and press the
Only clips whose format is the same as recording format 6 shown in the figure below can be played
back.
THUMBNAIL
•• Thumbnail screens are not output from the COMPONENT OUT terminal.
64
and buttons, and press the
button (the color of the frame changes to blue-green). Press the
1
2
3
4
5
6
OPERATION
ALL CLIP
SAME FORMAT CLIPS
SELECTED CLIPS
MARKED CLIPS
TEXT MEMO CLIPS
SLOT CLIPS
SETUP
EXIT
or press the
button. (For details on playback, see page 62.)
!
PROPERTY
DELETE CLIP PROPERTY
CARD STATUS
FORMAT
REPAIR CLIP DEVICES
REPAIR CLIP PROPERTY SETUP
(LOOP)
SYSTEM INFO
EXIT
EXIT
(or )
1
MENU
and
button again to
7
8
META DATA
LOAD
RECORD
USER CLIP NAME
INITIALIZE
PROPERTY
EXIT
P2
2
SET
PAGE/
AUDIO MON/VAR
buttons,